The Raven AutoBoom constantly and smoothly adjusts your boom height automatically while travelling at speeds up to 32kph. The AutoBoom gives you a uniform and accurate coverage at 15 to 30% higher than normal speeds.

With reduced limitations on ground speed and reaction time, AutoBoom reduces operator fatigue allowing more acres to be sprayed per day.

AutoBoom also offers simple operation - just turn on the power switch and tap left and right boom tip down. Manual override is available at any time during your application simply by touching your boom switches up.

AutoBoom's Parallel hydraulic system constantly keeps the hydraulic valves open, allowing the system to adjust effortlessly to your terrain.

AutoBoom offeres simple operator installation - install the system in less than a day!

PowerGlide
The PowerGlide system is a low-cost starter system that uses gauge wheels to detect the ground height and then automatically adjusts the boom with hydraulic pressure. Perfect for trailed or self-propelled sprayers.

• Low-cost Autoboom kit
• One button engage
• Compact console, takes up less space in the cab
• Easy to use and adjust
• Great for trailed or self-propelled sprayers
• Optional suspension wheel

AutoBoom PowerGlide uses state of the art hydraulics and gauging wheels to measure the distance to the ground.

Each AutoBoom kit consists of three parts:

• A Controller Kit (Part #: 117-0137-022) consists of the console and cabling that controls the system from your cab. The Controller kit remains the same regardless of the machine you are using.
• An Installation Kit consists of the components on the exterior of your machine. The installation kit is machine-specific, so different machines will use different kits.
• An Axle Kit is suspended and ridgid, and is also required for the AutoBoom PowerGlide system.

PowerGlide Plus
The PowerGlide Plus system boasts all the same features as the PowerGlide system, but is available in either CAN or standard configuration. The CAN configuration can be operated through a Raven Viper, Envizio Plus, or SCS4000 console. Pressure based boom leveling system

• Available in either CANbus or standard configuration
• Simplified calibration procedure
• Use with Viper, Envizio Plus or SCS4X00 consoles for setup and operation
• Suspension wheel system
• Hands free operation, just set the boom height and go!

CAN PowerGlide Plus upgrades available

UltraGlide
The UltraGlide system uses ultrasonic sensors to detect ground height and then automatically adjusts the boom with hydraulic pressure. This systems is also available in CAN or standard configuration and can be operated through a Raven Viper, Envizio Plus, or SCS4000 console.

• Ultrasonic boom leveling system with ultrasonic sensor
• Available in either CANbus or standard configuration
• Simplified calibration procedure, one button calibration
• Use with Viper, Envizio Plus or SCS4X00 consoles for setup and operation
• Hands free operation, just set the boom height and go!

Each AutoBoom kit consists of two parts:

• A Controller Kit consists of the console and cabling that controls the system from your cab. The Controller kit remains the same regardless of the machine you are using.
• An Installation Kit consists of the components on the exterior of your machine. The installation kit is machine-specific, so different machines will use different kits.

If you currently have a PowerGlide Plus System, it can be easily upgraded to a UltraGlide System by purchasing the UltraGlide Upgrade Kit.

CAN UltraGlide upgrades available